Products
News
- Warmth in Winter —— Classic Cases of Shenghua's Elevator Renovation and Installation
- Breaking News: All Three Factories of Shenghua Elevator Awarded Top - tier (A1) Qualification
- Embark on a New Journey Together and Lead the Future --- Beijing Shenghua Elevator Group Holds the 2025 High-level Marketing Conference in Hainan
Contact us
TEL：400-919-9990
Address：No. 7, Niuhui North Fourth Street, Shunyi District, Beijing, China
No. | Function Name | Function Description |
1 | Door Light Curtain Safety Protection | An infrared light beam is set at the entrance and exit. Once an obstacle blocks it, the elevator door will reopen. |
2 | Collective - Selective Control | The elevator accepts up - and - down signals at intermediate floors. |
3 | Lock - out Service | By operating the "Run/Stop" key switch installed on the designated floor, the elevator can be started or stopped. |
4 | Safe Stopping | When the elevator breaks down outside the door area, the controller conducts safety monitoring, and the elevator stops at the nearest floor and opens the door. |
5 | Arbitrary Service Floor Setting | The elevator can be set to stop at any desired floor. |
6 | Full - Load Direct Operation | When fully loaded, the elevator will not respond to calls from intermediate floors. |
7 | Overload Alarm | When overloaded, the elevator keeps the door open and the in - car buzzer rings. |
8 | Car Emergency Lighting | When the normal lighting power supply in the car is cut off, emergency lighting is immediately provided. |
9 | Five - Party Intercom Device | People in the car or on the car top can communicate with those in the machine room or monitoring room through this device. |
10 | Wrong Command Cancellation | If a wrong in - car command button is pressed, pressing the button twice in succession can cancel the command. |
11 | Dedicated Operation | Dedicated for VIP service. At this time, the elevator no longer accepts hall calls, only in - car commands. |
12 | Maintenance Operation | A maintenance operation mode for maintenance personnel. |
13 | Attendant Operation | The elevator can be operated by a dedicated person inside the car. |
14 | Fire - fighting Control | In case of a fire, when the fire - fighting switch is activated, the elevator will return to the preset floor, open the door, and stop operating. |
15 | Repeated Door Opening | If the elevator continues to close the door for 15 seconds without locking the door, it will switch to the door - open state. |
16 | Fault History Record | It can record the 20 most recent faults, including the occurrence time, floor, and fault code. |
17 | Automatic Return to Base Station | When there is no command or call, the elevator will automatically return to the base station after a certain time (the time can be set through parameters). |
18 | Automatic Control of Door - opening Time | When there is no attendant, the elevator door - opening time is adjustable. |
19 | Light - Load Anti - Disorder Function | When the load is small and passengers maliciously press most of the down - direction buttons, the computer will automatically cancel these signals to prevent ineffective operation. |
20 | Car Arrival Bell | During the elevator's deceleration process, the arrival bells installed on the car top and car bottom will ring to remind passengers in the car and those waiting in the hall that the elevator is arriving at the floor. |
21 | Automatic Power - off of Car Lighting and Fan during Idle Time | If the elevator has no commands and the idle time exceeds 5 minutes, the car lighting and fan will automatically power off. But when a command or call signal is received, they will automatically power on again. |
Optional Function | Front and Rear Door Independent Operation | Independent control of front and rear door opening and closing can be achieved. |